	材料表面分析
	材料力学试验机
	半导体设备/CMP
	生化仪器
	拉曼光谱仪
	三维形貌仪/检测仪

	首页产品展示材料力学试验机水泥管道/结构试验机

名称：水泥墙体结构试验机

编号：Pro20091793412

英文名称：Biaxial Masonry Testing Systems

Series SDM - B

For the Series SDM horizontal actuators are optional available for biaxial testing of masonry for the determination of compressive, shear, and flexural strength under a pre-defined static vertical compression loads according to EN 1052.

Biaxial Masonry Testing Systems

The following tests can be performed:

Compressive Strength and Elastic Modulus
according to EN 1052 - 1.
Initial Shear Strength
according to EN 1052 - 3 and 4
Flexural Strength
according to EN 1052 - 2
Flexural Strength under a pre-defined static vertical compression loads
according to EN 1052 - 2
Shear test of beam and block floor system in
accordance with prEN15037 - 1.

DIGICON 2000

This digital microprocessor controller meets the wide variety of testing needs of laboratories and manufacturers in the field of cement testing.

Closed Loop Digital Controller

The DIGICON 2000 is an extendable system that can control up to four different machines in closed loop force, displacement, deformation or external mode. The control modes can be changed during a certain test for more advanced testing. The system itself is free programmable and supports all widely used sample bodies with no dimensional limitations. Standard tests can be stored as test templates.

Options:

Digital Hand Wheel
Strip Printer
Building Material Testing Software PROTEUS

[ Back ]

Series NS 19 PA / Series PKNS 19D

Modular system which can be configured according to different specifications to suits your specific needs.

Series NS 19 PA:
fully automatic control in closed loop mode.
Series PKNS 19 D:
manual control with loading and unloading valves

19” – Standard Control Consoles
for the Control of Concrete Testing Machines

Upper Part Series NS 19 PA: All necessary periphery equipment like personal computer running building material testing software PROTEUS, screen, keyboard, digital controller DIGICON 2000, electrical switch board with push button and emergency-stop a.s.o. can be ergonomically integrated. The printer can be placed on the side on a swivable console.
Upper Part Series PKNS 19 D: Electronic load measuring and monitoring 19“-rack unit with digital display DIGICON 1000 for load and elongation read out with peak store facility, manual loading and unloading regulator valve, electrical switch board with push button and “Emergency-Stop“ are integrated. Optionally it allows an ergonomically integration of all necessary periphery equipment like personal computer, screen and keyboard.
Lower Part: Motorized hydraulic power pack unit with oil tank, filters, main high pressure pump and safety controls are integrated in the base of the console. The system has a very low noise level due to the internal gear pumps. The pump is put on anti-vibration elements to avoid any vibrations on the console.
Options: The control console can be placed on rollers and equipped with fast coupling for universal use. It is possible to run more than one machine with one control console, e.g. a compression and a bending testing machine.